Detachable
Discuss how partitions, plumbing and fixtures are packaged and assembled on site.
TOILETS · SHOWERS · WASHROOMS · SUPPORT SPACES
Modular toilet and shower blocks for project sites.
Plan container washrooms, modular toilet blocks and shower facilities for contractors and site operators. Define users, fixtures, wet-area construction and the factory versus site plumbing boundary.
- Fixture schedule drives the package
- Wet-area and drainage details reviewed
- Factory and site plumbing separated
FIXTURES & CONNECTIONS BRIEF
Start with the fixture schedule and utilities.
A sanitary building is selected around users, cleaning and services. Specify what is needed inside and where water, waste, power and ventilation connect.
ARRIVAL CONDITION & RESPONSIBILITY
Follow every service to its boundary
Set the factory and site boundary before comparing quotations. Actual inclusion and completion level depend on the selected model and written offer.
- 01
Cubicles and finishes
Review partitions, doors, cleanable surfaces and floor / drainage interface against the chosen plan.
- 02
Fixture and service package
Itemise toilets, showers, basins, taps, hot water, lights and ventilation; ask which pipes and wiring are installed or loose.
- 03
Site and local connections
Allocate incoming water / power, sewer or treatment connection, site drainage, licensed hookups and commissioning.
SYSTEM COMPARISON
Choose around fixtures and site readiness
Flat-pack
Compare packing and local fit-out work for a repeatable facility package.
EXPLORE IN 3D · PLAN YOUR CONFIGURATION
Get a feel for the space.
Turn the building. Look inside. Compare a finish and layout, then bring your choices into the project brief.
DetachableSanitary facilities · Exterior view
Preparing your 3D view…
100%
YOUR PLANNING CONCEPT
Current selection
Use this in my enquiryDetachable · Sanitary facilities · Mineral white · 1 module
Illustrative planning model. Layouts, openings, furniture, deployment and finishes are concepts. Confirm dimensions, movement details and supplied scope against the selected model drawings.
APPLICATION REFERENCES
Compare fixture and cubicle arrangements.
Explore the configurations and visible details. The selected drawing and quotation define the actual package and its delivery condition.
Multi-cubicle toilet unit
For a brief requiring separated fixtures in a repeatable block. Establish users, fixture types, accessibility and cleaning routes with the local project team.
- Fixture type and quantity
- Accessible facility requirements
- Door, ventilation and cleaning access
Toilet and shower arrangement
For temporary or project support uses that need a combined wet-area arrangement. Hot water, pressure, drainage and ventilation must be coordinated with the site services.
- Hot-water provision
- Water and drainage connections
- Wet-area separation and access
Washroom finish reference
For a more finished washroom brief, specify the visible fixture arrangement and surface palette alongside the concealed wet-area build-up. This interior reference is a separate configuration from the portable units shown beside it.
- Fixture and surface selections
- Shower enclosure and wet-area joints
- Cleaning and service access
THE DETAILS BEHIND THE BRIEF
Connect fixtures, cleaning and utilities.
01
Floor and fixture junctions
Ask for the floor build-up, falls, penetrations and waterproofing details. Inspect the agreed junctions and test records instead of relying on the finished surface appearance.
Request: wet-area sections, penetration details and agreed water-test records.
02
A complete plumbing and hot-water interface
Set incoming water conditions, fixture demand, hot-water responsibility, drainage outlet positions and venting. Define which pipes and tests belong in the factory package.
Request: fixture schedule and dimensioned water / drainage interface drawing.
03
Access for operation and maintenance
Review clear access, door operation, replaceable fixtures, ventilation and cleaning. Accessible design and fixture approvals need destination-specific review.
Request: door / fixture clearances, maintenance access and local compliance requirements.
YOUR PROJECT REQUIREMENTS
Build a sanitary facility enquiry
Enter the fixture quantities you are considering. Zero means not required; blank means undecided.
Make the delivery condition explicit
Ask the quotation to state every fixture and whether the connections are factory-installed, supplied loose or completed locally.
Useful documents to request
- Dimensioned fixture and cubicle plan
- Water supply, drainage and vent connection diagram
- Electrical / hot-water / ventilation scope and site responsibilities
YOUR DISCUSSION POINTS 0 selected
Selections are discussion requests. Availability, price and what is included must be confirmed for the selected model.
Add these to my enquiryThe next page prepares a brief for review; it does not send an enquiry automatically.FROM PROJECT BRIEF TO HANDOVER
Make the next decision clear.
Count the users and fixtures
Users, operating hours, fixtures, accessibility and hot-water requirements.
Map the services
Water, drainage, power, ventilation and treatment responsibilities.
Agree the wet-area package
Sections, materials, fittings, testing and completion boundaries.
Connect and commission
Local hookups, checks, cleaning and operational handover.
QUESTIONS BUYERS ASK
Frequently asked questions.
Review the decisions that matter for this stage of your project.
How do I choose the number of toilets, showers and basins?
Provide expected users, shifts, intended use and the local project requirements. A fixture schedule and layout should be reviewed for the applicable location rather than based on a universal ratio.
Do the units include toilets, basins, showers and hot-water equipment?
They can be requested as an itemised fixture package. Confirm quantities, model and specification, and whether each fixture, tap and heater is installed, supplied loose or excluded.
How are water and wastewater connected?
Request the location and size of the incoming water and drainage interfaces for the selected plan. The site team should confirm water availability and pressure, sewer or approved treatment connection, drainage falls and responsibility for licensed hookups.
Are drainage, waterproofing and cleaning details included?
Ask for the floor finish, floor drains, wet-area joint treatment, waterproofing scope and cleaning access to be shown on the agreed drawings. Actual details and site completion depend on the selected design.
Can accessible facilities be provided?
An accessible layout can be assessed against the project’s local rules. Share the jurisdiction and required clearances, door, fixture, grab-bar and approach requirements for design review.
Can the sanitary unit arrive with plumbing already installed?
A more factory-finished package can be discussed, depending on the system and transport method. Confirm which pipework and fixtures are fitted, what protection is provided in transit, and what must be tested and connected on site.
Do the photographs prove the waterproofing specification?
No. The visible finish and fixtures do not show the concealed build-up. Review the selected waterproofing detail, installation method and agreed test records.
A USEFUL FIRST ENQUIRY
Specify your sanitary package.
Share the inputs below to focus the configuration and supply discussion. If the project is still at feasibility stage, describe the users, location and problem to solve.
Specify your sanitary packageThe enquiry page prepares a brief for review and export. It does not send to a sales inbox in this edition.
Include in your brief
- Project destination and expected users
- Toilet, basin and shower quantities / types
- Accessible facilities and local fixture requirements
- Incoming water, hot-water and drainage arrangements
- Factory completion, site installer and delivery timing